New to the board......
Ran all the scripts against an OEM DMS....but not the newdms.bat
the only log that shows up is the patch.log and not a patchverify.log.
The output from the patch.log is below.
I put the hacked DMS back into the unit, let it sit there for 15-20 minutes and nothing changes.
Any thoughts on what to try next?
Thanks!
: No such file or directory
PhatPatch v0.5 - original code by bushing, additional patches by sbingner
Verifying:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13a0 Actual: 0000 13a0
Verified!
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0000 e350 Actual: 0000 e350
Verified!
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0000 03a0 Actual: 0000 03a0
Verified!
PhatPatch v0.5 - original code by bushing, additional patches by sbingner
first 2 words of flash=c102 0025
testing offsets 0x555 and 0x2aa
writing auto-id command (AA, 55, 90)
Flash chip reports manufacturer id=0020, device id=0057
offsets 0x555 and 0x2aa verified
Resetting flash.
Testing patch locations:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0033 1a00 Actual: 0000 1a00
Mismatch!
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0026 1a00 Actual: 0000 1a00
Mismatch!
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0019 1a00 Actual: 0000 1a00
Mismatch!
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 000c 1a00 Actual: 0000 1a00
Mismatch!
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13e0 Actual: 0000 13a0
Mismatch!
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0001 e350 Actual: 0000 e350
Mismatch!
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0001 03a0 Actual: 0000 03a0
Mismatch!
