Problems with PhatHack

[WebSurfinMurf]

I have read the boards, looked at all the files I could get my hands on, and yet, I seemed to have screwed the pooch.

Steps of stupidity:

1) Downloaded latest scripts from WIKI, backed up everything I could get my hands on
2) Ran DMSHack.bat
3) Loaded DMS onto my BMW 323
4) After waiting (possibly not long enough) I took the DMS out, and read the patch.log, it read:
BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9-X: Successful
BOOTB-X: Successful
BOOTF-X: Successful
BOOT*: Failed (or something like that, I don't have the LOG)
Here is where the stupidity came in.  Under a little panic, I decided to "corrupt" the ramdisk.sig.  As I later read, don't do this unless the boot fails.
Long story short, I got this:
BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9-X: Successful
BOOTB-X: Successful
BOOTF-X: Successful
BOOT*: Successful

I restored to a "good" ramdisk.sig.
I never got:
1) Voice confirmation
2) PatchVerified.log
3) Or any other log in the "logs" directory, except patch.log, contents below.
So I am unsure of my current state.  I tried restoring the DMS, running DMSHACK again, re-applying, same thing.
I DO get the log files to re-create, and music plays.  But I am unsure if it is OK to continue with the hack.
How can I validate if my Car unit is hacked properly?

Anywho, the NEWEST patch.log is here, below that is my previous patch.log
Any help/tips, poking at a stupid noob is welcome.

: No such file or directory
PhatPatch v0.8 - original code by bushing, additional patches by sbingner
Finding patch offsets:
Verified standard patch offsets
Verifying:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13a0    Actual: 0000 13a0
Verified!
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0000 e350    Actual: 0000 e350
Verified!
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0000 03a0    Actual: 0000 03a0
Verified!
Patch 8 @ 0330: don't try to read ramdisk.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 0000 eb00    Actual: 0000 eb00
Verified!
Patch 9 @ 02c0: don't try to read linux.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 0000 eb00    Actual: 0000 eb00
Verified!
PhatPatch v0.8 - original code by bushing, additional patches by sbingner
Finding patch offsets:
Verified standard patch offsets
first 2 words of flash=c102 0025
testing offsets 0x555 and 0x2aa
writing auto-id command (AA, 55, 90)
Flash chip reports manufacturer id=0004, device id=22ba
offsets 0x555 and 0x2aa verified
Resetting flash.
Testing patch locations:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0033 1a00    Actual: 0000 1a00
Detected patch 1 already applied
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0026 1a00    Actual: 0000 1a00
Detected patch 2 already applied
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0019 1a00    Actual: 0000 1a00
Detected patch 3 already applied
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 000c 1a00    Actual: 0000 1a00
Detected patch 4 already applied
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13e0    Actual: 0000 13a0
Detected patch 5 already applied
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0001 e350    Actual: 0000 e350
Detected patch 6 already applied
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0001 03a0    Actual: 0000 03a0
Detected patch 7 already applied
Patch 8 @ 0330: don't try to read ramdisk.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 02db eb00    Actual: 0000 eb00
Detected patch 8 already applied
Patch 9 @ 02c0: don't try to read linux.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 02f7 eb00    Actual: 0000 eb00
Detected patch 9 already applied

============================= Previous patch.log ======================================


: No such file or directory
PhatPatch v0.8 - original code by bushing, additional patches by sbingner
Finding patch offsets:
Verified standard patch offsets
Verifying:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13a0    Actual: 0000 13a0
Verified!
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0000 e350    Actual: 0000 e350
Verified!
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0000 03a0    Actual: 0000 03a0
Verified!
Patch 8 @ 0330: don't try to read ramdisk.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 0000 eb00    Actual: 0000 eb00
Verified!
Patch 9 @ 02c0: don't try to read linux.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 0000 eb00    Actual: 0000 eb00
Verified!
PhatPatch v0.8 - original code by bushing, additional patches by sbingner
Finding patch offsets:
Verified standard patch offsets
first 2 words of flash=c102 0025
testing offsets 0x555 and 0x2aa
writing auto-id command (AA, 55, 90)
Flash chip reports manufacturer id=0004, device id=22ba
offsets 0x555 and 0x2aa verified
Resetting flash.
Testing patch locations:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0033 1a00    Actual: 0000 1a00
Detected patch 1 already applied
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0026 1a00    Actual: 0000 1a00
Detected patch 2 already applied
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0019 1a00    Actual: 0000 1a00
Detected patch 3 already applied
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 000c 1a00    Actual: 0000 1a00
Detected patch 4 already applied
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13e0    Actual: 0000 13a0
Detected patch 5 already applied
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0001 e350    Actual: 0000 e350
Detected patch 6 already applied
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0001 03a0    Actual: 0000 03a0
Detected patch 7 already applied
Patch 8 @ 0330: don't try to read ramdisk.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 02db eb00    Actual: 0000 eb00
Detected patch 8 already applied
Patch 9 @ 02c0: don't try to read linux.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 02f7 eb00    Actual: 0000 eb00
Detected patch 9 already applied

[sbingner]

Your logs say that all the patches are applied

[WebSurfinMurf]

Thanks!

I ran the CD version after I wrote the message above, and I got the "applied" voice.
However, to continue my confirmation that I have bungled this upgrade, my hard drive is "ata-7", not "ata-6".
I didn't even know there was an Ata-7.....ordered another drive through new-egg.

[judb]

the ata command set version should not be a problem.  if it fits in the DMS and hooks up to the connector then it should just work.

it's possible that you need to clear off phtsys on your new dms via a reformat and then install the firmware again fresh from PMM or downloads.phathack.com and try that route.

[sbingner]

Any drive will work in it as long as it is Paralell and not Serial ATA...

[WebSurfinMurf]

Well, I got my new drive, worked like a charm.

The previous drive is now a 160GB "portable drive" for copying files.
I have no idea why it didn't work in the Phatnoise, but I won't dwell on it.


Thanks!

[sbingner]

I suspect the 160GB drive didn't work because you didn't replace the "linux" file on it with the lba48 version I patched...  it's available at http://downloads.phathack.com/sbingner/linux-lba48.bz2

If you have issues with .bz2 I could change it to another format... you can also get it from inside the dmsutils scripts, I think it's called "linux-lba48-nolog" there