Author Topic: I/O device error  (Read 3378 times)

0 Members and 1 Guest are viewing this topic.

Offline trbo_gli

  • Newbie
  • Posts: 1
I/O device error
« on: April 07, 2008, 10:42:50 pm »
Hi, recently my dms is giving me an error when trying to save/eject on the music managaer. The error message says "the request could not be performed because of an I/O device error". Does anyone know what that might be? I tried hacktools but that would not work either.

Any help is appreciated.

Offline VorTechS

  • Administrator
  • Veteran.
  • *****
  • Posts: 1678
  • PhatHack Media Manager & DMS Tools Wizard Author
Re: I/O device error
« Reply #1 on: April 08, 2008, 09:07:00 pm »
Sounds like the disk could be on it's way out.  Try running a chkdsk on it, and if that fails a low-level diagnostics check will probably confirm the disk is on its last legs.

It's also possible there's a problem with the cradle, so if you want to rule that out you could try getting hold of a 3.5" to 2.5" adaptor cable to power the drive connected directly to a PC.
Kenwood KDC-W7031 | Kenwood KHD-CX910 | 250GB DMS | PhatHack Media Manager v1.1.4 (Alpha) | VIOT

Catch me weekdays 8am-4pm GMT on IRC @ irc.freenode.net on channel #phathack (aka the chat link!!)