Author Topic: VW OEM Phatbox in a Ford?  (Read 8915 times)

0 Members and 1 Guest are viewing this topic.

Offline rmicroys

  • Newbie
  • Posts: 5
  • n00b
VW OEM Phatbox in a Ford?
« on: October 28, 2005, 04:39:16 pm »
I'm new to all this.  I just picked up my Phatnoise box for my VW and I love it.  I was wondering because they are pretty inexpensive (the VW OEM box) if it's possible to hack the VW one to work in my Ford.  I know I'd probably have to make my own interface cable, but is it possible to reprogram the unit to work with the Ford box?  Would it be as simple as copying the files on to the DMS cartridge and flashing the box or is it more involved or impossible?
I used to have an open mind, but my brains kept falling out.

Offline A543

  • Senior Member
  • Veteran.
  • *****
  • Posts: 214
Re: VW OEM Phatbox in a Ford?
« Reply #1 on: October 28, 2005, 04:52:58 pm »
I believe the Ford units actually have different internal connection wiring. They are not physically the same as the VW or Keg or standard Phatboxes.
I wouldn't attempt hooking a Ford box up to a non Ford headunit, or a standard box up to a Ford headunit without learning more.  Hopefully someone here can give you more information.

Offline denniz

  • Newbie
  • Posts: 7
Re: VW OEM Phatbox in a Ford?
« Reply #2 on: October 28, 2005, 11:13:29 pm »
I have a Kenwood Music Keg that's perfectly ;D in my '98 Sable with a PIE Mercury-to-Kenwood interface.

I don't know if the PIE Ford-to-Kenwood interface would talk to the VW PhatBox even if you found a Kenwood cable.   ???
I hear and I forget.  I see and I remember.  I do and I understand.  Confuscious

Offline dafamous12

  • Getting the hang of things.
  • **
  • Posts: 53
  • Smurfin On 18 Wheels Across The U.S.A!!
Re: VW OEM Phatbox in a Ford?
« Reply #3 on: October 29, 2005, 12:35:10 am »
Yes,it will work. You will have to load the kenwood firmware on to it.But it will work with the pie interfaces.

Offline snoggle

  • A few posts under my belt.
  • *
  • Posts: 25
  • 2004 Impala LS + KHD-CX910
Re: VW OEM Phatbox in a Ford?
« Reply #4 on: October 30, 2005, 06:11:37 am »
Crutchfield sells PIE brand 13pin DIN to 13 pin DIN Kenwood compatible cables for $29, and  you could cut one of the DIN ends off and solder a Phatbox connector on the other end. You have to be a fairly skilled solderer to make your own cable. The pinouts are in the Wiki/FAQ and they do work.  I used them to make my cable because I couldn't find one to buy.
« Last Edit: October 30, 2005, 06:14:13 am by snoggle »

Offline rmicroys

  • Newbie
  • Posts: 5
  • n00b
Re: VW OEM Phatbox in a Ford?
« Reply #5 on: November 04, 2005, 08:19:18 pm »
Cool... I just checked my head unit in my Ford truck, and it's compatible.  It does that 'NO CDDJ' thing when the CD button is hit twice.  So I may look at installing buying the veedub one and hacking it to work.  Sounds like an interesting winter project.
I used to have an open mind, but my brains kept falling out.

Offline Fritz_H

  • Newbie
  • Posts: 1
Re: VW OEM Phatbox in a Ford?
« Reply #6 on: January 26, 2006, 06:58:53 am »
A couple of q's - what head unit are you running in your ford?  I've been looking for info on whether I could do this with my '05 F150's stock head unit.

Second - have you gone any further with this project?

Offline rmicroys

  • Newbie
  • Posts: 5
  • n00b
Re: VW OEM Phatbox in a Ford?
« Reply #7 on: March 08, 2006, 04:07:29 pm »
Quote
A couple of q's - what head unit are you running in your ford?  I've been looking for info on whether I could do this with my '05 F150's stock head unit.

Second - have you gone any further with this project?

I've been rather lazy trying to get another phatbox for the truck (2003 F150 with the OEM CD player which is CDDJ compatible) - I've already got a phatbox in my 2004.5 Jetta - I've never gotten around to getting past the car stereo acquistions and procurements committee.  She holds too much veto power to get ANOTHER phatbox for the truck.  ;)  So... I'll just have to live with CDs in the truck for now.  :(  Never got around to getting all the details to make the install work.
« Last Edit: March 08, 2006, 04:08:25 pm by rmicroys »
I used to have an open mind, but my brains kept falling out.