« previous next »
Pages: [1]   Go Down

Author Topic: Source for phatbox connector shell  (Read 8166 times)

0 Members and 1 Guest are viewing this topic.

Offline kbsilver

  • Newbie
  • Posts: 11
  • PhatHacker
Source for phatbox connector shell
« on: January 29, 2006, 05:10:03 am »
I can find plenty of the 26 pin connectors for the Phatbox, but cannot seem to locate a shell for the connector. One that also has the hold down screws. If anyone has found these would appreciate the info.

Thanks.
Logged

Offline az1324

  • Senior Member
  • Getting the hang of things.
  • *****
  • Posts: 93
Re: Source for phatbox connector shell
« Reply #1 on: January 29, 2006, 06:52:31 am »
If you remove the screw standoffs you can use the clip housings.
Logged

Offline S80_UK

  • Global Moderator
  • Veteran.
  • *****
  • Posts: 392
  • Volvo S80 D5 with VW Phatbox
    • Volvo Phatbox Installation
Re: Source for phatbox connector shell
« Reply #2 on: January 29, 2006, 11:31:29 am »
Also, you can get a plastic shell with screw-locks from RadioSpares.  They are UK based, but also have international representation - see http://rswww.com and look up RS Stock no: 448-4531.  Their web site identifes this as 3M part number 10326-52A0-008 which you may also be able to get from other sources.

Regards,

Les.

Logged

Offline kbsilver

  • Newbie
  • Posts: 11
  • PhatHacker
Re: Source for phatbox connector shell
« Reply #3 on: February 06, 2006, 12:18:44 pm »
Thanks for the help.  Didn't see the forest from the trees before.  Will simply remove the standoff's and use the clips.
Logged
Pages: [1]   Go Up
« previous next »