Author Topic: My CX910 is dead  (Read 7977 times)

0 Members and 1 Guest are viewing this topic.

Offline madcowzz

  • Newbie
  • Posts: 2
  • PhatHacker
My CX910 is dead
« on: March 22, 2006, 09:29:27 am »
I have bought a new KDC-W707 for my CX910, that it worked perfectly before my old headunit was stolen, but now the Keg doesn't work anymore. No red led, no green led: nothing.  :'(
I can only hear a little noise from it.. but the DMS works perfectly on my PC.
What could it be? It is possible that it was broken during the theft, simply unplugging the cable? It would seem strange.  :-?
However, how could I try to reactivate it?  There is perhaps some fuse in the inside? There's some sort of procedure to reset it? (The unit was been detached for 3 weeks)

Many thanks for every reply  :-/

Offline sbingner

  • Administrator
  • Veteran.
  • *****
  • Posts: 1301
Re: My CX910 is dead
« Reply #1 on: March 22, 2006, 09:17:33 pm »
In my experience they're very tough little boxes... I'd reccoemnd opening it up and making sure the IDE cable is seated properly, that's the most common problem

Offline Johnny

  • Newbie
  • Posts: 10
Re: My CX910 is dead
« Reply #2 on: March 22, 2006, 10:55:14 pm »
Maybe the plug/cable was damaged/snagged at the head unit end when the old head unit was nicked?

Thieves not being generally known for their careful unplugging of stuff.

Offline sbingner

  • Administrator
  • Veteran.
  • *****
  • Posts: 1301
Re: My CX910 is dead
« Reply #3 on: March 23, 2006, 07:20:55 am »
the pinouts are at http://www.phathack.com/pinouts.html - you can test it

Offline madcowzz

  • Newbie
  • Posts: 2
  • PhatHacker
Re: My CX910 is dead
« Reply #4 on: March 23, 2006, 08:25:28 am »
All right, after several attempts at the workshop, the system has resumed his work!!  :D :D
I cannot explain well what was the problem, probably the Keg did not succeed to receive the ignition signal.  :-?

However... thanks for the many answers!
« Last Edit: March 23, 2006, 08:26:19 am by madcowzz »