« previous next »
Pages: [1] 2   Go Down

Author Topic: VW Copying to new DMS Failed  (Read 16847 times)

0 Members and 1 Guest are viewing this topic.

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
VW Copying to new DMS Failed
« on: July 02, 2006, 08:34:10 pm »
I went through the patch process with the BootCD v. 1.5
Everything was working fine until the last step, Copying to new DMS.

I'm not sure what is going wrong.  I have tried the process before but had no success, so I decided to start over using the same HDD and original DMS.

I've already run the dd comand on this HDD before starting over, if that makes a difference.

Please tell me what information I need to post.

Thanks
Logged

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: VW Copying to new DMS Failed
« Reply #1 on: July 02, 2006, 10:32:43 pm »
I propose searching around.. lots of folks have had issues with the VW hacks.  its either the ramdisk.sig or bad partition info about 90% of the time it seems.
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #2 on: July 03, 2006, 12:07:10 pm »
I've tried this before with the same HDD.  I didn't receive a failed to copy error, but the drive would not play in the Phatbox.  I followed other instructions for VW/Audi hacks... using the dd command, etc...  no avail.  So I was using the original DMS for a while.  I decided to try again.

Would having run those dd commands on the HDD have any affect when starting the process over?  Could it be interfering with this hack attempt?

Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #3 on: July 05, 2006, 01:27:23 am »
On the original DMS, there is a bootload.log file, but the file is empty.  No text when I open it.  I never heard a success sound when applying the patch.  I'm not sure the ramdisk.sig fix will work.
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #4 on: July 05, 2006, 01:32:45 am »
Here is the bootload from the new DMS, which failed to copy.

BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9: Successful
BOOTB: Successful
BOOTF: Successful
BOOT*: Successful


I just updated the firmware, because I think I had the latest firmware, but the wrong box.  I updated that, and I'll try the patch and copy again...
« Last Edit: July 05, 2006, 12:47:49 pm by Anton »
Logged

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: VW Copying to new DMS Failed
« Reply #5 on: July 05, 2006, 01:30:27 pm »
the bootload.log looks good from that DMS.. there should be another log file in the root of PHTSYS .. can you post it too?  things should be working.  have you tried renaming your plugin folder?
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #6 on: July 05, 2006, 08:04:17 pm »
please disregard the above posts, since I started over.
Ok, I started over.  Updated the firmware on the original DMS.  Ran the patch disc, Then I applied the patch, and the 'Phatbox is unlocked' message played this time.
Then I switched the HDD and copied to the new DMS. OK!

Something wasn't right, music wasn't copying to the new DMS in PMM (media manager) Should I be using Music manager instead?

I did the 'dd' command according to instructions from Genesis.  There was a bad partition... Then I loaded the new DMS with phatnoise firmware.

My headunit says to 'Check Magazine' and it doesn't play the one song i loaded :-/
DMS doctor says there is no M3U playlist... :(
After sync the DMS, Everything is added to the HDD, but does not show in PMM :-[

You mentions about changing the plugins folder somehow... I can't find a plugins folder!

Here is the bootload.log from the original DMS

BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9: Successful
BOOTB: Successful
BOOTF: Successful
BOOT*: Successful

This is box_id_log.txt

Unique ID: 0xc4f61a90
Random ID: 0xc4f61a90d76c1fa39e04358e131da1e9
CPU: EP73xx, ver 0x02
Lot Code: 0x3101
%

What is going wrong here.

Should I try to corrupt the ramdisk.sig file?

« Last Edit: July 05, 2006, 10:19:13 pm by Anton »
Logged

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: VW Copying to new DMS Failed
« Reply #7 on: July 05, 2006, 10:40:54 pm »
the bootload.log shows that your phatbox is booting fine.. after that theres another log file created, I not at home so I can't find the file name easy.. but if you search for rc pairs you can get an level 10 debug rc.sh and rc.sig to copy to the phtsys partition and try booting that way.. it should help figure out whats up.  

I imagine its a filesystem / pmm issue.
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #8 on: July 30, 2006, 03:12:43 am »
Ok, sorry to be so long in responding.

I put the level10 rc files into the phtsys partition.

Then i put the DMS in the Phatbox, tried to boot...
I can't find any log file. Either on Phtsys or Phtdta.

When I turn on the Radio,Phatbox, Both lights light up for a few seconds (10) then a beep, and Chk Magazine on the headunit.

A couple things differing between new and orig. DMS.  Now has profiles.ini in phtsys instead of phtdta.   Also, there is a file named forceupdate on the new DMS.


judb,
I read where you say that bootload.log does not auto create itself.  So should I put a file on the new Phtsys called bootload.log for to be written to?
« Last Edit: July 30, 2006, 04:11:12 am by Anton »
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #9 on: July 30, 2006, 03:17:35 am »
Also some files missing from the new DMS in the Phtdta partition are:

PnaActPack

Reserved.dat

These 2 are not on the new DMS.

ran chkdsk, and found no errors.
« Last Edit: July 30, 2006, 04:14:11 am by Anton »
Logged

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: VW Copying to new DMS Failed
« Reply #10 on: July 30, 2006, 03:08:53 pm »
bootload.log needs to be user created.  make a copy of one of the ini files on phtsys and rename it bootload.log

when the system boots it will detect the file and replace the contents with the log output.

I don't know about reserved.dat for sure but the PNAACTPAK seems like an audible file to me.  you can copy them off the other DMS if you want but I doubt that is why you are having issues.  Everything you should need to run the phatbox would be in the files you extract for your "firmware" (the 4 zip files for that)
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #11 on: July 30, 2006, 04:35:57 pm »
Ok, followed your instruction, here is the bootload.log file

[PhatMan]
enable_voice_prompts=1
DMS_DB_version=2
MakeVoicePromptForTitle=0
enable_cover_art=0
SaveVersion3DB=1
remove_leading_articles=1
album_sort_v3_mode=1
create_mode_change_sql_tables=0
allow_v3_aac=0
allow_mpeg1_2=0
allow_ac3=0
allow_above_2gb=0
Logged

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: VW Copying to new DMS Failed
« Reply #12 on: July 31, 2006, 01:47:39 am »
hmm, nope that isn't the bootload output.. either the file you used was not big enough (try to find one that is around 4k in size at least) or the system isnt booting at all.
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #13 on: July 31, 2006, 03:25:50 am »
Ok, The file wasn't big enough, Now it is really big!

[Phatbox]
modification=1
announce=0
kenwood_digits=2
track_display_250=0
pioneer_99_digits=0
ssa_use_disc_up_down=0
ssahelpfile=/dos/tts/se_help.mp3
list_title_text=%m%n: %t
bad_album_db=on
alpha_file_ext=mp3
sleeptime=300000

bc.0100=6
bc.0101=0
bc.0108=0
bc.010c=0
bc.1102=0
bc.1201=0
bc.1301=1
bc.1302=1
bc.1303=1
bc.2103=0
bc.2104=0
bc.2201=1
bc.2202=1
bc.2203=1
bc.2204=1
bc.2205=1
bc.2206=1
bc.2207=1
bc.3100=1
bc.3101=1
bc.3102=1
bc.3201=1
bc.3202=1
bc.3301=1
bc.3302=1
bc.3401=1
bc.3402=1
bc.6101=1

fw.2200=BMW
fw.2900.*.0000=Honda_DiscUpDown
fw.2900.*.0001=Honda_6Button
fw.3400=Becker
fw.3402=Becker
fw.3800=Volvo
fw.3950.4.0000=VW_Non_Premium6_v4
fw.3950.4.0001=VW_Premium6_v4
fw.3950.4.0002=Audi_I_v4
fw.3950.4.0003=Audi_II_v4
fw.3950.5.0000=VW_Non_Premium6_v4
fw.3950.5.0001=VW_Premium6_v4
fw.3950.5.0002=Audi_I_v4
fw.3950.5.0003=Audi_II_v4
fw.3950.6.0001=VWAudi_v6_3
fw.3950.6.0002=VWAudi_v6_5
fw.3950.6.0003=VWAudi_v6_2
fw.3950.6.0004=VWAudi_v6_3
fw.3950.6.0005=VWAudi_v6_1
fw.3950.6.0006=VWAudi_v6_2
fw.3950.6.0007=VWAudi_v6_2
fw.3950.6.0008=VWAudi_v6_6
fw.3950.6.0009=VWAudi_v6_2
fw.3950.6.000a=VWAudi_v6_2
fw.3950.6.000b=VWAudi_v6_2
fw.3950.6.000c=VWAudi_v6_6
fw.3950.6.000d=VWAudi_v6_2
fw.3950.6.000e=VWAudi_v6_3
fw.3950.6.000f=VWAudi_v6_4
fw.3950.6.0010=VWAudi_v6_2
fw.3950.6.0011=VWAudi_v6_3
fw.3950.6.0012=VWAudi_v6_4
fw.3950.6.0013=VWAudi_v6_3
fw.3950.*.0001=VWAudi_v7_3
fw.3950.*.0002=VWAudi_v7_5
fw.3950.*.0003=VWAudi_v7_2
fw.3950.*.0004=VWAudi_v7_3
fw.3950.*.0005=VWAudi_v7_1
fw.3950.*.0006=VWAudi_v7_2
fw.3950.*.0007=VWAudi_v7_2
fw.3950.*.0008=VWAudi_v7_6
fw.3950.*.0009=VWAudi_v7_2
fw.3950.*.000a=VWAudi_v7_2
fw.3950.*.000b=VWAudi_v7_2
fw.3950.*.000c=VWAudi_v7_6
fw.3950.*.000d=VWAudi_v7_2
fw.3950.*.000e=VWAudi_v7_3
fw.3950.*.000f=VWAudi_v7_4
fw.3950.*.0010=VWAudi_v7_2
fw.3950.*.0011=VWAudi_v7_3
fw.3950.*.0012=VWAudi_v7_4
fw.3950.*.0013=VWAudi_v7_3
fw.3950.*.0014=VWAudi_v7_3
fw.4700=Nissan
fw.4800=Nissan_SAT
fw.0801=Visteon
fw.0802=Visteon_SSA
fw.0e74=Toyota
fw.0a00=Pioneer
fw.02ff=Kenwood_v12
fw.2680=Chrysler_Class2
fw.2e00=Mazda

menu.wait=5

menu.0.numitems=6

menu.1.text=Feature Menu Help
menu.1.audio=/dos/tts/it_help.mp3
menu.1.action=PLAY:/dos/tts/se_help.mp3

menu.2.text=Enable Extra Voice Help
menu.2.audio=/dos/tts/it_extra_help_en.mp3
menu.2.action=VPON:/dos/tts/se_extra_help_en.mp3

menu.3.text=Disable Extra Voice Help
menu.3.audio=/dos/tts/it_extra_help_dis.mp3
menu.3.action=VPOFF:/dos/tts/se_extra_help_dis.mp3

menu.4.text=Randomize All Mode
menu.4.audio=/dos/tts/it_rand_all.mp3
menu.4.action=MAGRANDON:/dos/tts/se_rand_all.mp3

menu.5.text=Randomize Current List Mode
menu.5.audio=/dos/tts/it_rand_cur_list.mp3
menu.5.action=MAGRANDOFF:/dos/tts/se_rand_cur_list.mp3

menu.6.text=About This Firmware
menu.6.audio=/dos/tts/it_about.mp3
menu.6.action=FIRMWARE_VERSION

;Already in SSA mode
audioid.0.0=TITLE
audioid.0.1=PLAY
audioid.0.2=WAIT 5
audioid.0.3=END

;Switch into same SSA mode
audioid.1.0=/dos/tts/beep2.wav
audioid.1.1=CURRENT
audioid.1.2=TITLE
audioid.1.3=PLAY
audioid.1.4=WAIT 5
audioid.1.5=END

;Switch to different SSA mode
audioid.2.0=/dos/tts/beep1.wav
audioid.2.1=BROWSING
audioid.2.2=CURRENT
audioid.2.3=TITLE
audioid.2.4=PLAY
audioid.2.5=WAIT 5
audioid.2.6=END

;Track Audio ID
audioid.3.0=/dos/tts/beep3.wav
audioid.3.1=PLAYLIST
audioid.3.2=ARTIST
audioid.3.3=ALBUM
audioid.3.4=GENRE

I skipped forward to my Radio Type...

[VWAudi_v7_1]
auto_pong=on
menu.wait=5
menu.0.numitems=64
menu.1.audio=/dos/tts/it_help.mp3
menu.1.action=PLAY:/dos/tts/se_help.mp3
menu.2.audio=/dos/tts/it_extra_help_en.mp3
menu.2.action=VPON:/dos/tts/se_extra_help_en.mp3
menu.3.audio=/dos/tts/it_extra_help_dis.mp3
menu.3.action=VPOFF:/dos/tts/se_extra_help_dis.mp3
menu.4.audio=/dos/tts/it_about.mp3
menu.4.action=FIRMWARE_VERSION
menu.5.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/a.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.6.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/b.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.7.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/c.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.8.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/d.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.9.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/e.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.10.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/f.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.11.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/g.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.12.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/h.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.13.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/i.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.14.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/j.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.15.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/k.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.16.action=PLAY:/dos/tts/it_radio_type.mp3;PLAY:/dos/tts/l.alpha.mp3;SLEEP:5;PLAY:/dos/tts/it_radio_type_help.mp3
menu.17.act
Logged

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: VW Copying to new DMS Failed
« Reply #14 on: July 31, 2006, 01:19:27 pm »
right but did you copy the file as bootload.log and then put the DMS into your phatbox?  it should look like
Code: [Select]
BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9: Successful
BOOTB: Successful
BOOTF: Successful
BOOT*: Successful

see http://wiki.phathack.com/Bootloader_FAQ for more details of the bootloader and bootload.log
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #15 on: July 31, 2006, 01:46:42 pm »
OK, What I did was copy the Phatbox.ini file into the phtsys.  Renamed it bootload.log.  Apparantly, it did not boot at all, because this log is the same as phatbox.ini

So now what?

I should note that both lights on the phatbox turn on for about 30 seconds, then off, BEEP, and then both on again.  Unit then switches to radio signal
« Last Edit: July 31, 2006, 01:53:48 pm by Anton »
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #16 on: July 31, 2006, 05:36:42 pm »
I did some more...

Ram DMS doctor on the original DMS, got this message:
Checking for system files: Fail: MD5 Checksum Failed |:\aadec.sig


I put the level 10 rc files on the Original DMS, and booted the box with it.

bootload.log looks the same.
there is a long file colled logfile.txt
also a folder named log with 5 logs in it... patchverify, patch, logshere.txt, dmesg, and patchwrite

Should I post one of these?

Thanks for the help, judb
« Last Edit: July 31, 2006, 05:37:04 pm by Anton »
Logged

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: VW Copying to new DMS Failed
« Reply #17 on: July 31, 2006, 10:50:01 pm »
is this the original DMS we are working on?

I would FORMAT the phtsys partition and download the firmware files by hand from http://downloads.phathack.com/firmware/
and extract each into the phtsys partition.

remove the forceupdate and forcesettings files from phtsys after extracting these zip files.

you can backup the contents of the phtsys in a zip file prior to format if you want to.

then recreate the bootload.log file and deploy your rcpairs for level 10 logging and see what happens.
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #18 on: August 01, 2006, 02:15:46 am »
I did what you said to on the Original DMS.  There was no forcesettings file, just forceupdate.

bootload.log

BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9: Successful
BOOTB: Successful
BOOTF: Successful
BOOT*: Successful

there are four other files that were created.
box_id_log.txt
box_id_mru.txt
logfile.txt  -- This is a big file
error_log.txt, which says:  CORRUPT_FILE: /dos/Music/flactemp.flac


I'm not sure why the new DMS isn't working, but I cannot get a bootload.log file on it.  Like you suggested, It could be a filesystem/PMM  problem.
I have PMediaM, and PMusicManager.  It seemed that the files were copying to the new DMS in Music Manager, but then would not save/Eject DMS.   Original DMS still works fine.
« Last Edit: August 01, 2006, 05:29:46 pm by Anton »
Logged

Offline Anton

  • Needs to get outside.
  • ***
  • Posts: 116
  • I'll figure it out
Re: VW Copying to new DMS Failed
« Reply #19 on: August 15, 2006, 01:00:29 am »
Alright, I've narrowed it down, but I'm not sure how to proceed.

New DMS does not boot in the patched box.
DMS Doctor says:
checking for system files- Fail: could not load XML Document
Checking for Profile & Playlists- Fail: No M3U playlist signatures Found

So I check the file caled DMSPlaylists.xml in PHTDTA:
1.79 KB in original DMS
1.59 KB in new DMS
Is this the file giving me problems?
Logged
Pages: [1] 2   Go Up
« previous next »