News:

I have updated the spam detection on registrations, and as such I am enabling new users.  If we have spam, I will change it back to by approval.

Main Menu

Slow startup after patch

Started by Bas, July 03, 2006, 12:25:39 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Bas

Hello,

I've patched my VW phatbox (with BMW firmware) according to the instructions on this board. All went fine. I've got the message "System has been patched" etc. But when I turn the radio on it takes more than 2 times the time that was needed before the patch (normally around 12 seconds, now more than 30). Also the first time I inserted the cartridge the radio keeps saying (1-00) and then switches to 1-01 to go back to 1-00 within a second. The only way I got out of there was to press the "Setup button" (disc 6) to get it out of there.

The box works ok, but the long startup time is annoying.

Anyone had something similar ?

Greetings,

Bas

judb

i would suggest that you load the firmware on the drive again after running a chkdsk on PHTSYS ... remove the forceupdate file in PHTSYS after updating the firmware but before ejecting the disk.  you don't need to have the phatbox updated just the files on the disk drive.

Bas

I've chkdsk'd it multiple times in Linux and Windows. Can I use the non-original DMS to load the firmware ?
Do I use the PMM to update the firmware ?

Thanks In advance

markbowen

Yes, use PMM to load the BMW firmware onto the new (non-original) DMS.  Delete the forceupdate file as judb wrote.

Also, try to transfer at least a few GBs of music onto the drive before you try it again.
Kenwood DNX7200/Kenwood KHD-C710 Keg/320GB DMS

Bas

Maybe I forgot to mention that the VW box ran perfectly with the 20GB DMS with BMW firmware for more than 8 months, Is it still worth trying to reflash the box ?

Greetings,

Bas

markbowen

QuoteMaybe I forgot to mention that the VW box ran perfectly with the 20GB DMS with BMW firmware for more than 8 months, Is it still worth trying to reflash the box ?

Greetings,

Bas

Reloading the firmware onto the DMS as described will not reflash the box.
Kenwood DNX7200/Kenwood KHD-C710 Keg/320GB DMS

Bas

I've reinstalled the firmware as descibed. Now its working consequent (not crashing), but it's still slow at bootup (around 30 sec). In my other BMW (3series) it starts up in 14 seconds.

Anyone checked their startup times ?