Text only | Text with Images

PhatHack

Phatbox / Keg software and support => Phatnoise Hardware Support => Topic started by: ralph.deratt on June 22, 2005, 07:51:35 PM

Title: connector for Kenwood changer
Post by: ralph.deratt on June 22, 2005, 07:51:35 PM
Can anyone tell me the part number / purchase info for the conector that plugs into the back of a Kenwood head unit.  I'm trying to interface it to my Phatbox, but I cant seem to find the right connector.


Thanks,

RdeR
Title: Re: connector for Kenwood changer
Post by: crane007 on June 22, 2005, 08:38:53 PM
ralph,

Are you refering to the 13-pin male mini-din ?
If so, you can get the connector from DigiKey
CP-1013-ND - 13-pin male mini-din
CP-1113-ND - 13-pin female mini-din

If you need the 26-pin Dsub:
3M1703-ND - 26-pin - Dsub - Solder cup
MPB26A-ND - 26-pin - Dsub - Ribbon


crane007





Title: Re: connector for Kenwood changer
Post by: Nick on July 09, 2005, 05:13:30 PM
If you are looking for the original cable it is the KHD-5L1, available at http://www.pacparts.com http://www.kenwoodparts.com or http://www.hermanelectronics.com
Title: Re: connector for Kenwood changer
Post by: judb on July 09, 2005, 05:40:51 PM
I think it would be useful to get a FAQ thread with a list of all the various cables and part numbers for hooking a phatbox / keg upto various head units and urls to where you can purchase the cables.  

Anyone up to collecting all that info?
Title: Re: connector for Kenwood changer
Post by: sbingner on July 10, 2005, 12:15:39 AM
Started a wiki page for it...

http://wiki.phathack.com/Cable_FAQ
Text only | Text with Images