Great news, I usually purchase my cartridge parts from the states but they now appear to have discontinued the connector board.
Kenwood audio in the UK now have the parts in stock, Telephone number is 01728 746500
Parts required to build a complete DMS are as follows
DMS-CASE-0001 Cartridge Top Case
DMS-CASE-0002 Cartridge Bottom Case
DMS-CASE-0003 Cartridge Latch
DMS-CASE-0004 Cartridge Button
DMS-CASE-0005 Cartridge Spring
DMS-CAP-0001 Top Rubber
DMS-CAP-0002 Bottom Rubber
DMS-IFBD-0001 Connector Board
The only part that they cannot supply is PNCL-130002, but this is 4 x M3x6 screws, these are standard parts available from any hardware store.
Total cost for all the parts including the VAT and shipping is £49.00
This means that you can now build your new DMS without opening your original cartridge.
I have just ordered the case parts along with a solid state drive, I will post my results after I have built and tested it
How much are the connector boards? I'm thinking it's worth stocking up on these... ;)
Good find btw!
£7.09 + the VAT
Company name is Fullers.
Web site is www.carradiorepairs.co.uk but it is not active yet
You don't need part DMS-CASE-0004 as this is included in DMS-CASE-0002. when I was ordering from the states it was a seperate part
Has anyone from the USA ordered one of the boards yet? If so, what was the shipping like? I'd be interested in doing some sort of group buy to lower shipping costs if that is high.
I'm thinking that ordering all the parts besides the board from the regular source plus the board from the UK would be the least expensive method.
A good idea, as I said I may well look to bulk buy some of the boards as they are dwindling in numbers... I can then offer them on....
All the parts are available from kenwoodparts.com except the connector board this has been discontinued in the states. The prices from the states are very good in comparison to the UK (50%) but I always had to place 2 orders as I got hammered import VAT which was only £6.00 but the post office charges £8.00 handling to give the tax man the £6.00. When I purchased all the parts from the states it was about $50.00 (£25.00) but when I had added the import duty that added an extra 50% to the price. Since then I have asked them to ship it in 2 packages (no import duty). I am contemplating getting a DMS-DPIF2-0001 cradle circuirt board as I have been reading of quite a few dead cradles.
Quote from: cmv on May 06, 2008, 06:28:02 AM
Has anyone from the USA ordered one of the boards yet? If so, what was the shipping like? I'd be interested in doing some sort of group buy to lower shipping costs if that is high.
I'm thinking that ordering all the parts besides the board from the regular source plus the board from the UK would be the least expensive method.
x2 -- I'm wondering the same thing. Anyone?
I called that number today and tried to order the DMS connector board, but the man said the part number didn't exist! ??? And when I explained what I wanted, he told me that no parts for the Music Keg DMS were available unless I wanted to buy a complete DMS for £150 or something :P ... Am I asking the wrong questions or have they discontinued this?
Thanks!
Can anybody in the UK help us with this? I need 2 boards quite badly.