PhatHack

Phatbox / Keg software and support => Phatnoise Hardware Support => Topic started by: illingworth22 on May 25, 2008, 02:21:23 PM

Title: DMS DC Adaptor
Post by: illingworth22 on May 25, 2008, 02:21:23 PM
Anyone know you can get the DMS Cradle power adaptor's from in the UK or Ireland? Wanted an original pref, but failing that I will try one from Maplins!
Title: Re: DMS DC Adaptor
Post by: S80_UK on May 25, 2008, 07:36:00 PM
Hi,

You may get lucky finding an original.. But there's no need.  You need an adaptor to provide somewhere between 9 and 12 volts and it should be rated to at least 0.5 amps up to perhaps 1 amp.  The output must be DC and with the centre contact of the connector wired as positive.  It does not need to be regulated since the cradle has a built in regulator for the DMS.   In the UK, Maplins are a good source.  Part number XX09K - £9.99 - should be OK if set to 9 or 12 volts.

But do get the polarity right.  Most adaptors that are bought separately can be set up positive or negative to the centre contact.  My suggestion - once you have it set up, glue things so they can't change.

Me - I had a suitable 9 volt radio adaptor in my junk box already with the correct plug and polarity.

Hope this helps.
Title: Re: DMS DC Adaptor
Post by: VorTechS on May 27, 2008, 07:24:44 AM
I bought two AC adaptors from Argos!

http://www.argos.co.uk/static/Product/catalogId/1500001001/partNumber/9829701.htm

...works a treat! :)
Title: Re: DMS DC Adaptor
Post by: S80_UK on May 27, 2008, 08:55:04 AM
Yes - that one would certainly do the job as well.
Title: Re: DMS DC Adaptor
Post by: illingworth22 on May 30, 2008, 10:53:05 AM
Got one sourced Thanks for the speedy reply Guys!