Print Page - Source for phatbox connector shell

Title: Source for phatbox connector shell
Post by: kbsilver on January 29, 2006, 05:10:03 AM

I can find plenty of the 26 pin connectors for the Phatbox, but cannot seem to locate a shell for the connector. One that also has the hold down screws. If anyone has found these would appreciate the info.

Thanks.

Title: Re: Source for phatbox connector shell
Post by: az1324 on January 29, 2006, 06:52:31 AM

If you remove the screw standoffs you can use the clip housings.

Title: Re: Source for phatbox connector shell
Post by: S80_UK on January 29, 2006, 11:31:29 AM

Also, you can get a plastic shell with screw-locks from RadioSpares. They are UK based, but also have international representation - see http://rswww.com and look up RS Stock no: 448-4531. Their web site identifes this as 3M part number 10326-52A0-008 which you may also be able to get from other sources.

Regards,

Les.

Title: Re: Source for phatbox connector shell
Post by: kbsilver on February 06, 2006, 12:18:44 PM

Thanks for the help. Didn't see the forest from the trees before. Will simply remove the standoff's and use the clips.

PhatHack

Phatbox / Keg software and support => Phatnoise Hardware Support => Topic started by: kbsilver on January 29, 2006, 05:10:03 AM