Print Page - Use an Audi cable in a BMW

Title: Use an Audi cable in a BMW
Post by: Bas on February 20, 2006, 01:34:14 PM

Hello,

I was wondering if it's possible to use an Audi cable and solder a 8 pin din connector to it and use it in a BMW with a Blitzsafe adapter.
I checked out the pin layouts and saw that the Audi uses pin 14,24 & 25 while BMW uses only pin 21 the other pins are more or less the same

Anyone tried this ?

Greetings,

Bas

Title: Re: Use an Audi cable in a BMW
Post by: kbsilver on March 02, 2006, 09:53:19 PM

Pin 21 is extremely important (is the data bus interface) so the short answer is, no you cannot.

PhatHack

Phatbox / Keg software and support => Phatnoise Hardware Support => Topic started by: Bas on February 20, 2006, 01:34:14 PM