PhatHack
Phatbox / Keg software and support => Phatnoise Hardware Support => Topic started by: galileofigaro on August 23, 2007, 08:58:36 pm
-
Hello, iīm try and try hack my keg and nothing but this worked fine and play songs, but i disconnected the cable and connect and the keg not work, the head unit not detect the keg. i remove the hack, and download the firmware, put the dms in the keg and the red led is on, the green led is on a few second them the red led do five slow blinking, then turn off and them this green light start to a fast blinking for a five minutes and the the process looping. i turn off the head unit and turn on and nothing, no detect the keg and the leds do the wrote process. I format the phatsys and download the new firmware and nothing not work, the green flashing donīt stop. the chkdsk /f donīt do nothing. the dms donīt have the hack, how can i do?
GREAT GREAT GREAT My Music Keg Work, And Is Hacked ;D ;D, Greatest 120gb
-
Hello, iīm try and try hack my keg and nothing but this worked fine and play songs, but i disconnected the cable and connect and the keg not work, the head unit not detect the keg. i remove the hack, and download the firmware, put the dms in the keg and the red led is on, the green led is on a few second them the red led do five slow blinking, then turn off and them this green light start to a fast blinking for a five minutes and the the process looping. i turn off the head unit and turn on and nothing, no detect the keg and the leds do the wrote process. I format the phatsys and download the new firmware and nothing not work, the green flashing donīt stop. the chkdsk /f donīt do nothing. the dms donīt have the hack, how can i do?
GREAT GREAT GREAT My Music Keg Work, And Is Hacked ;D ;D, Greatest 120gb
This is my exact problem. I wonder what this guy did to make it work....
-
Probably just patience. Sometimes it takes a few goes for the hack to apply. If you have a Kenwood Keg, sometimes you need to disconnect the unit (remove the cable from the back of the PhatBox) wait a few minutes and then re-attach the cable. [A process outlined in the tools documentation, assuming you read it].