New DMS Stuck on "Eject Disc"

[gorgon5]

Hi folks,

I've been trying to hack my Music Keg, and have tried both the .bat files and the hack cd. I only got the "patch complete" message cleanly once... other times included no audio message and one time having a stuttering mix of audio between track 1 and patch complete!

In any event, the bootload.log says:

BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9: Successful
BOOTB: Successful
BOOTF: Successful
BOOT*: Successful
                                       
I've been able to use newdms.bat to make a new DMS, but when I put it in the keg, it just says "Eject Disc". Can anyone tell me if the problem is with the patch or the new DMS?                                                   

[judb]

is that bootload.log off the new or old DMS first off?

can you post a copy of the patchverify.log from the old dms?

do you have any plugins?  try renaming the plugin folder
also try chkdsk on phtsys on the newdms, then delete all the files in the root of phtsys (not the subfolders)
extract a copy of the firmware files to the freshly cleaned phtsys on the newdms and remove the forceupdate and force settings files.
try again.

[gorgon5]

YAYYYY!!!! Thanks judb! It works!

I think it was cleaning the phtsys on the new dms and adding the firmware files that did it. The original dms still does a weird thing now where it doesn't start the audio until you pause and unpause it, but that doesn't matter 'cause I'll be using the new one

For posterity, here is what I wrote before I tried the above:

That was the bootload.log of the old DMS. I have the SSA plugin, so renamed the plugins folder to no avail. Also tried corrupting the ramdisk.sig - the patchcomplete sound never happens, and it just plays track 1 of playlist one (I have to stop and start it to hear the audio, though).

Here is patchverify.log from the old DMS:

Starting Patch Process
PhatPatch v0.4 - original code by bushing, additional patches by sbingner
Verifying:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13a0    Actual: 0000 13a0
Verified!
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0000 e350    Actual: 0000 e350
Verified!
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0000 03a0    Actual: 0000 03a0
Verified!
PhatPatch v0.4 - original code by bushing, additional patches by sbingner
Verifying:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00    Actual: 0000 1a00
Verified!
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13a0    Actual: 0000 13a0
Verified!
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0000 e350    Actual: 0000 e350
Verified!
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0000 03a0    Actual: 0000 03a0
Verified!