I have read the boards, looked at all the files I could get my hands on, and yet, I seemed to have screwed the pooch.
Steps of stupidity:
1) Downloaded latest scripts from WIKI, backed up everything I could get my hands on
2) Ran DMSHack.bat
3) Loaded DMS onto my BMW 323
4) After waiting (possibly not long enough) I took the DMS out, and read the patch.log, it read:
BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9-X: Successful
BOOTB-X: Successful
BOOTF-X: Successful
BOOT*: Failed (or something like that, I don't have the LOG)
Here is where the stupidity came in. Under a little panic, I decided to "corrupt" the ramdisk.sig. As I later read, don't do this unless the boot fails.
Long story short, I got this:
BOOT0-0: OK
BOOT0-1: OK
BOOT0: Successful
BOOT9-X: Successful
BOOTB-X: Successful
BOOTF-X: Successful
BOOT*: Successful
I restored to a "good" ramdisk.sig.
I never got:
1) Voice confirmation
2) PatchVerified.log
3) Or any other log in the "logs" directory, except patch.log, contents below.
So I am unsure of my current state. I tried restoring the DMS, running DMSHACK again, re-applying, same thing.
I DO get the log files to re-create, and music plays. But I am unsure if it is OK to continue with the hack.
How can I validate if my Car unit is hacked properly?
Anywho, the NEWEST patch.log is here, below that is my previous patch.log
Any help/tips, poking at a stupid noob is welcome.
: No such file or directory
PhatPatch v0.8 - original code by bushing, additional patches by sbingner
Finding patch offsets:
Verified standard patch offsets
Verifying:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13a0 Actual: 0000 13a0
Verified!
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0000 e350 Actual: 0000 e350
Verified!
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0000 03a0 Actual: 0000 03a0
Verified!
Patch 8 @ 0330: don't try to read ramdisk.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 0000 eb00 Actual: 0000 eb00
Verified!
Patch 9 @ 02c0: don't try to read linux.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 0000 eb00 Actual: 0000 eb00
Verified!
PhatPatch v0.8 - original code by bushing, additional patches by sbingner
Finding patch offsets:
Verified standard patch offsets
first 2 words of flash=c102 0025
testing offsets 0x555 and 0x2aa
writing auto-id command (AA, 55, 90)
Flash chip reports manufacturer id=0004, device id=22ba
offsets 0x555 and 0x2aa verified
Resetting flash.
Testing patch locations:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0033 1a00 Actual: 0000 1a00
Detected patch 1 already applied
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0026 1a00 Actual: 0000 1a00
Detected patch 2 already applied
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0019 1a00 Actual: 0000 1a00
Detected patch 3 already applied
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 000c 1a00 Actual: 0000 1a00
Detected patch 4 already applied
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13e0 Actual: 0000 13a0
Detected patch 5 already applied
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0001 e350 Actual: 0000 e350
Detected patch 6 already applied
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0001 03a0 Actual: 0000 03a0
Detected patch 7 already applied
Patch 8 @ 0330: don't try to read ramdisk.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 02db eb00 Actual: 0000 eb00
Detected patch 8 already applied
Patch 9 @ 02c0: don't try to read linux.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 02f7 eb00 Actual: 0000 eb00
Detected patch 9 already applied
============================= Previous patch.log ======================================
: No such file or directory
PhatPatch v0.8 - original code by bushing, additional patches by sbingner
Finding patch offsets:
Verified standard patch offsets
Verifying:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0000 1a00 Actual: 0000 1a00
Verified!
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13a0 Actual: 0000 13a0
Verified!
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0000 e350 Actual: 0000 e350
Verified!
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0000 03a0 Actual: 0000 03a0
Verified!
Patch 8 @ 0330: don't try to read ramdisk.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 0000 eb00 Actual: 0000 eb00
Verified!
Patch 9 @ 02c0: don't try to read linux.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 0000 eb00 Actual: 0000 eb00
Verified!
PhatPatch v0.8 - original code by bushing, additional patches by sbingner
Finding patch offsets:
Verified standard patch offsets
first 2 words of flash=c102 0025
testing offsets 0x555 and 0x2aa
writing auto-id command (AA, 55, 90)
Flash chip reports manufacturer id=0004, device id=22ba
offsets 0x555 and 0x2aa verified
Resetting flash.
Testing patch locations:
Patch 1 @ 0bb8: make drive signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0033 1a00 Actual: 0000 1a00
Detected patch 1 already applied
Patch 2 @ 0bec: make rc.sh signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0026 1a00 Actual: 0000 1a00
Detected patch 2 already applied
Patch 3 @ 0c20: make phatd signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 0019 1a00 Actual: 0000 1a00
Detected patch 3 already applied
Patch 4 @ 0c54: make linux signature check always succeed: [bne verify_sig_failed -> bne PC+1]
Expected: 000c 1a00 Actual: 0000 1a00
Detected patch 4 already applied
Patch 5 @ 0354: make ramdisk invalid signature return 0 instead of 0xFFFFFFFF: [movlne r0, 0xFFFFFFFF -> movlne r0, #0]
Expected: 0000 13e0 Actual: 0000 13a0
Detected patch 5 already applied
Patch 6 @ 0c80: make ramdisk signature check verify 0 instead of 1: [cmp r0, #1 -> cmp r0, #0]
Expected: 0001 e350 Actual: 0000 e350
Detected patch 6 already applied
Patch 7 @ 0358: make ramdisk valid signature return 0 instead of 1: [moveq r0, #1 -> moveq r0, #0]
Expected: 0001 03a0 Actual: 0000 03a0
Detected patch 7 already applied
Patch 8 @ 0330: don't try to read ramdisk.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 02db eb00 Actual: 0000 eb00
Detected patch 8 already applied
Patch 9 @ 02c0: don't try to read linux.sig (boot without any .sig files): [bl sector_read_suzy -> bl PC+1]
Expected: 02f7 eb00 Actual: 0000 eb00
Detected patch 9 already applied
