Author Topic: VW phatbox in...  (Read 8046 times)

0 Members and 1 Guest are viewing this topic.

Offline dvg

  • Newbie
  • Posts: 6
VW phatbox in...
« on: June 30, 2005, 02:19:09 am »
Will the VW phatbox work in a Mazda with the proper firmware loaded?  I know I need to find the proper cable.

Thanks
Dan

Offline Slartibartfast

  • Newbie
  • Posts: 11
  • Fjords are the result of Infinite Improbability
Re: VW phatbox in...
« Reply #1 on: August 01, 2005, 01:29:23 pm »
As far as *I* know (which means I might not know what I think I know) the differences are in the comms protocol between the head unit and the PB. There are a few in use in different make cars, common ones being K-Bus, I2C and CAN. What I definitly don't know is wether the PB comms is software driven or hardware determined. If it's hardware, you're stuffed, unless you swap your head unit to match the PB type.
Perhaps Phatnoise will tell you?

Offline Terry_Kennedy

  • Moderator
  • Veteran.
  • *****
  • Posts: 253
  • There and back again
Re: VW phatbox in...
« Reply #2 on: August 01, 2005, 07:58:07 pm »
Quote
What I definitly don't know is wether the PB comms is software driven or hardware determined. If it's hardware, you're stuffed, unless you swap your head unit to match the PB type.

The Ford/Visteon PhatBox isn't compatible with anything else. The others are "mostly" interchangeable - newer units such as the Toyota have additional signal lines to deal with those head units. Also, some PhatBoxes have RCA jacks and/or power connectors on the box in case those aren't supplied by the car harness (for example, the BMW DSP kit needs a box w/ RCA jacks).