Author Topic: Firmware Failure?  (Read 22732 times)

0 Members and 1 Guest are viewing this topic.

Offline uncontrolled

  • Newbie
  • Posts: 14
Re: Firmware Failure?
« Reply #20 on: June 15, 2009, 08:29:23 pm »
If you want to send me your 'dead' keg I can try to fix it -- if I can, I'll send it back and you just pay shipping... if not I'll toss it for you ;)

I live in Hawaii, but the shipping shouldn't be all that bad.

Well, i live in the Netherlands and don't know what the shipping costs are...

If the red LED is the one flashing, could this just be a dodgy power connection?  Worth opening up the Keg and taking a look inside to check the pins/connections at the cable point to see if anything is obviously wrong?

Opened the Keg 3 weeks ago, didnt see anything wrong, looked nice and clean, no bad connections. Checked the main cable too. Also disconnect the the cables from the subwoofer and rear speakeramps during the updates to make sure these aren't causing looping problems or something else.

Offline VorTechS

  • Administrator
  • Veteran.
  • *****
  • Posts: 1678
  • PhatHack Media Manager & DMS Tools Wizard Author
Re: Firmware Failure?
« Reply #21 on: June 17, 2009, 07:50:10 pm »
Or you can send it to me in the UK and I can have a look... ;)
Kenwood KDC-W7031 | Kenwood KHD-CX910 | 250GB DMS | PhatHack Media Manager v1.1.4 (Alpha) | VIOT

Catch me weekdays 8am-4pm GMT on IRC @ irc.freenode.net on channel #phathack (aka the chat link!!)