Author Topic: Need ribbon cable info please  (Read 7842 times)

0 Members and 1 Guest are viewing this topic.

Offline pencilneck

  • Newbie
  • Posts: 2
Need ribbon cable info please
« on: September 15, 2005, 02:50:34 am »
Does any one have any info on the 2" ribbon cable used in the Phatbox?

http://4130-products.com/step/Phat2cd/Picture%20036.html

I've done a little digging in Digi Key and can't seem to come up with a match.  

What I'm needing is a 6" long version.  

Thank you.

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
« Last Edit: September 15, 2005, 05:11:13 pm by judb »

Offline pencilneck

  • Newbie
  • Posts: 2
Re: Need ribbon cable info please
« Reply #2 on: September 16, 2005, 02:28:39 am »
Ah, you've helped kickstart my brain.  I dug up a laptop harddrive I have sitting around and was able to plug it right up to the 2" cable of the Phatbox.

Thank you very much.

Pencilneck  blah blah blah

Offline sbingner

  • Administrator
  • Veteran.
  • *****
  • Posts: 1301
Re: Need ribbon cable info please
« Reply #3 on: September 19, 2005, 09:23:19 am »
That'll work, so long as it has all 44 pins - the phatbox uses the key pin as well as a reserved pin for the insert/removal notification.  If your IDE cable doesn't have the key pin connected it won't work

The Key pin is a pin that normally has no pin, so it's blanked out with plastive so you can't put the cable in backwards