« previous next »
Pages: [1]   Go Down

Author Topic: Dead 40gig DMS  (Read 10039 times)

0 Members and 1 Guest are viewing this topic.

Offline Shunt

  • Newbie
  • Posts: 4
Dead 40gig DMS
« on: February 11, 2009, 05:27:03 pm »
Hi all hope you can help. I have a BMW Phatbox with 40gig DMS. Whilst trying to update the files on my DMS the system locked up and wouldn't let me eject and save. The disk now appears to be dead as PMM fails to recognise it when I instert it in the cradle. Phathack tools also fails to recognise it. So I'm presuming it's dead and beyond repair. My PC does recognise the disk and says it requires formatting.

Would the easiest solution be to get a new DMS and if so where's the cheapest place to source one. I'm in the UK near Manchester. There's a couple on ebay in the states for £60 - £80, would these be compatible with my BMW system??

Help much appreciated as I miss the system.............. ::) ::) ::)
Logged

Offline markbowen

  • Global Moderator
  • Veteran.
  • *****
  • Posts: 438
Re: Dead 40gig DMS
« Reply #1 on: February 11, 2009, 11:26:13 pm »
Though it sounds like the original DMS has packed up, you might want to make sure it's not the cradle at fault before you shell out for a new DMS. 

When you pop the DMS in the cradle, does the green light come on at all?  Does it come on and stay on?  If so but Windows never loads the DMS, it probably is the DMS.

You could also try to confirm the problem with a test or two, depending on your available resources and comfort level with opening up the DMS case:
The best way would be to open up the DMS case and pop in another laptop drive in place of the original.  If that drive works in the cradle, then you know the problem is the original drive.

Or you could open up the DMS case and pop the original drive into an external drive enclosure.  If the drive is recognized by Windows, it strongly suggests that the cradle is the problem.

Anyway, if it turns out you need a new DMS, eBay is probably the best place to find one.  Any DMS can work with your system, just be sure to confirm with the seller that it is an original DMS.
Logged
Kenwood DNX7200/Kenwood KHD-C710 Keg/320GB DMS

Offline Shunt

  • Newbie
  • Posts: 4
Re: Dead 40gig DMS
« Reply #2 on: February 12, 2009, 07:12:34 pm »
Thanks for the reply, when I place the DMS in the cradle the green light does come on, sometimes flashing and sometimes stays on. I presume this mean the cradle is OK.

So my best option is ebay, there's 2 for sale on there at the moment, one much cheaper with new cradle too but the seller says it's for a GM system. I've emailed him and he's unsure if it will work, but from your advice any DMS will work.

Ebay item - http://cgi.ebay.co.uk/Phatnoise-GM-Mobile-Digital-Media-Kit-40-GB-DMS-New_W0QQitemZ330285897909QQcmdZViewItemQQptZCar_Electronics_Parts_Accessories?hash=item330285897909

Let me know what you think before I pull the trigger.

 ??? ??? ???
Logged

Offline VorTechS

  • Administrator
  • Veteran.
  • *****
  • Posts: 1678
  • PhatHack Media Manager & DMS Tools Wizard Author
Re: Dead 40gig DMS
« Reply #3 on: February 13, 2009, 08:05:04 am »
The GM system cradle is no different.  However, the green light flashing up on yours is potentially a good thing.

If you take a look under 'Computer Management', does the disk appear there?
Also, take a look in 'My Documents\PhatHack Media Manger\Logs' there should be a file called 'StartupSequence.txt' or something like that.
Can you post the contents of this file up - I might be able to tell you if it's the cradle or the disk... ;)

If you do get one of those kits, could you do me a favour and take a backup of the firmware before you go ahead and wipe it? ;)
Logged
Kenwood KDC-W7031 | Kenwood KHD-CX910 | 250GB DMS | PhatHack Media Manager v1.1.4 (Alpha) | VIOT

Catch me weekdays 8am-4pm GMT on IRC @ irc.freenode.net on channel #phathack (aka the chat link!!)

Offline Shunt

  • Newbie
  • Posts: 4
Re: Dead 40gig DMS
« Reply #4 on: February 13, 2009, 04:42:54 pm »
The green light flashes a couple of times when you insert the DMS then goes out and just the red stays on. I can hear the disk periodically spinning up. I think I'll go for the GM kit sounds the cheaper option and yes I'll get a backup before I do anything with it. In explorer I can see both disks, but when i try to access one it says it needs formatting.

Text from startup file as follows (deep breath):

Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 261B0C7C

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: 603F219E




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: 4223B5E9



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 261B0C7C

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: 603F219E




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: 4223B5E9



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      done.
   Disk ID: 4
   Disk Name: USB-HS FUJITSU MHT2080A USB Device
   PnP Device: USBSTOR\DISK&VEN_USB-HS&PROD_FUJITSU_MHT2080A&REV_0.01\6&346ADF59&0
   Disk Unique ID (not serial!): 17F82949

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #0
      Drive: F:
      Serial #: <New Volume: WMI Returned DBNull>




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #4, Partition #1
      Drive: J:
      Serial #: <New Volume: WMI Returned DBNull>



      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
      Device
         Checking device name for USB context...
         Evaluates to true!
         Also has drive letter!
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #2
      Drive: D:
      Serial #: F49285F9




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.
      Device evaluation complete.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
      Next device evaluation:
      Determining device signature...
      Skipping device as no signature found.
   Succeeded....enumerating devices....
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
      Device
         Checking device name for USB context...
         Not a USB labelled device.
   Device enumeration complete.
Starting Device Listing....
   Getting Device Snapshot....


Win32_Drive List
----------------

      Starting device evaluation:
      Determining device signature...
      done.
   Disk ID: 0
   Disk Name: WDC WD2500JS-75NCB3
   PnP Device: IDE\DISKWDC_WD2500JS-75NCB3_____________________10.02E04\4&3836D654&0&0.0.0
   Disk Unique ID (not serial!): E686F016

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      No logical disks available for device partitions.

      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Complete)
      Partition: Disk #0, Partition #1
      Drive: C:
      Serial #: 744298E3




      Partitions List
      ---------------

      (Debugging: About to Query WMI for Logical Disks)

      (Debugging: ..Query Comple
« Last Edit: February 13, 2009, 04:44:25 pm by Shunt »
Logged

Offline VorTechS

  • Administrator
  • Veteran.
  • *****
  • Posts: 1678
  • PhatHack Media Manager & DMS Tools Wizard Author
Re: Dead 40gig DMS
« Reply #5 on: February 14, 2009, 05:30:21 pm »
There is no sign of the USB disk.  So unfortunately this doesn't help us move forward any.  I would try another disk in the DMS to rule out there being a problem with the cradle.
Logged
Kenwood KDC-W7031 | Kenwood KHD-CX910 | 250GB DMS | PhatHack Media Manager v1.1.4 (Alpha) | VIOT

Catch me weekdays 8am-4pm GMT on IRC @ irc.freenode.net on channel #phathack (aka the chat link!!)

Offline Shunt

  • Newbie
  • Posts: 4
Re: Dead 40gig DMS
« Reply #6 on: February 14, 2009, 06:06:07 pm »
Thanks, I've bought the GM based DSM listed on ebay in the States. You say all DMS's are compatible, I take it you mean without any hacking etc. I will be able to load it up with tunes, stick it in the player and away we go?

Sorry if I sound like a numptie here, but just needed clarification.  ::) ::) ::)
Logged

Offline VorTechS

  • Administrator
  • Veteran.
  • *****
  • Posts: 1678
  • PhatHack Media Manager & DMS Tools Wizard Author
Re: Dead 40gig DMS
« Reply #7 on: February 14, 2009, 06:29:34 pm »
 You will need to swap the firmware on the DMS first.  Use the DMS tools to do this.
Logged
Kenwood KDC-W7031 | Kenwood KHD-CX910 | 250GB DMS | PhatHack Media Manager v1.1.4 (Alpha) | VIOT

Catch me weekdays 8am-4pm GMT on IRC @ irc.freenode.net on channel #phathack (aka the chat link!!)

Offline nvradtec

  • Newbie
  • Posts: 12
  • I'm to old to grow up now
Re: Dead 40gig DMS
« Reply #8 on: March 31, 2009, 03:08:19 am »
I had a similar experience happen, the harddisk was went bad in my case
Logged
KDC-X991 USB HU, Sirius 902, Excelon 542 4 ch amp,  910 Keg, 100 and 160 GB DMS, Excelon 87 CD Changer, all through a 210 switch
Pages: [1]   Go Up
« previous next »