Thanks for the swift reply & for all your work on the DMS Tools.
I've checked my old DMS in DMS Tools & the firmware lists as Volkswagon/Audi )with no version No., so i checked in PMM & it is running Audi Ver 6.0. When i created my new disk i actually loaded it with Audi Ver 7.02, but i did not ask it to reflash my Phatbox. I have now installed Ver 6.0 on my new DMS with DMS Tools, so they are all running the same version.
I'm running PMM under Windows XP Pro - how do i go about re-installing the TTS Engine?
PMM recognises both DMS cartridges & i have just tried to add some new music to my old DMS & i now get the same "voice failed" message followed by it crashing - so i guess you are correct & PMM needs fixing.
Thanks again
(Edit)
I've had a bit more of a go at getting things right now, but still not had any luck.
The ATT voice samples don't play from PMM or windows control panel, so i definateley need to reload them, can i do this from the disk originally supplied with my Phatnoise or download them somewhere?
As they weren't working i switched to the Microsoft Sam voice in PMM & then managed to copy some music to my new DMS & eject it without problem.
I put the DMS in my Phatnoise but it still doesn't seem to boot the box, i get a red light, then red & green lights stay lit for 10-15 secs & then go off, this sequence is then repeated over & over.
I have read that some VW cars need the phatnoise cable removed for 10 secs after hacking the box, as they don't power down properley without doing so, could this be an issue with my Audi? The cable is not easy to get at, but i'll give it a go if you think it might be the problem.