Phatnoise stop working

[Druss]

Hello,
in the first place I want to say Hi to all of you. I'm from Poland soo please be patient to My

Now lets back to the My problem. I bought a Audi A8 D2 with phatnoise. It's work for today lets say perfect. Today when I start the car the phatnoise doesn't start up. On the screen of Navigation plus i have "no CD".
I'll unplug dms for a second and plug in, there wasnt any affect.

What is wrong with my phatnoise?
Can you help me with my problem?

Best Regards,
Druss.

[VorTechS]

The most likely cause, if you've done nothing to it, is a corruption on the system partition (PHTSYS).

I would start by doing a simple 'Repair DMS (PHTSYS)' using the DMS tools.

Do you know if the Phatbox has been hacked?

[Druss]

Hi and thx for answer.

Do you know if the Phatbox has been hacked?

Probably not.

Ok, when I'm going to be at home I'll do a Repair DMS".

[Druss]

Hi again.

So My problem with not working DMS in car was solved. I pulled it out from the car for a minute and put it on and sit's start working.

But now I want to upload a new song and the DMS doesn't connect with the computer. On the cradle USB lights only a red diode and the green flash for a 2-3 second and thats all. The connection with the computer stops at 25% or 33% and stops.
The media manager can't connect with DMS - whats wrong now ?

Regards,
Druss.

[VorTechS]

Unfortunately, I don't know.  It could be a problem with the PhatNoise database (SQLite 2.x).
I believe it's a file with the extension .pndb

Being biased, I could tell you to use PhatHack Media Manager (http://phathackmm.com) instead, as that will probably not have any issues reading the disk/files

[Druss]

Hi,
Sorry for not replying but I was busy.

DMS still not working, only the red diode lights but the green lights on 2-3 sec just like I wrote in the last post.

Now I'm trying to singup in your link but I'm still waiting for a Activation email.

Do you think this application from your link solved this problem or let add/remove music?

Best Regards,
Druss.

[VorTechS]

Another thought, as I have seen this before - it could be your power supply.  You could try replacing it with a new generic one (12v @ 900mA minimum).

Did you get the confirmation e-mail through or not?  If not, let me know the username and I'll activate it manually for you.