« previous next »
Pages: [1]   Go Down

Author Topic: kenwood -> vw  (Read 12262 times)

0 Members and 2 Guests are viewing this topic.

Offline fpw

  • Newbie
  • Posts: 5
  • PhatHacker
kenwood -> vw
« on: March 24, 2006, 10:26:04 pm »
Hi guys,

I've got a 20gb kenwood keg at the moment hooked up to a Z838W headunit. I'm seriously looking at getting a new Mk5 Golf GTI and want to know if I can run my kenwood keg with the VW headunit (will be a RCD500).

I've had a search and am I correct in thinking if I flash the unit to the VW firmware and buy the cable that VW sell I'll be ok, or, will I have to chop up a custom cable?

Cheers.
Logged

Offline sbingner

  • Administrator
  • Veteran.
  • *****
  • Posts: 1301
Re: kenwood -> vw
« Reply #1 on: March 24, 2006, 10:47:06 pm »
If you can get a cable from VW you'll be fine
Logged

Offline fpw

  • Newbie
  • Posts: 5
  • PhatHacker
Re: kenwood -> vw
« Reply #2 on: March 25, 2006, 05:45:17 pm »
Excellent. Thanks!
Logged

Offline crane007

  • A few posts under my belt.
  • *
  • Posts: 44
  • Mazda 3 Phathacker
Re: kenwood -> vw
« Reply #3 on: March 26, 2006, 03:40:23 pm »
I have a spare VW cable I would be willing to sell. PM me if you want it.

crane007
Logged

Offline zerogz

  • Newbie
  • Posts: 5
  • Just Phat!
Re: kenwood -> vw
« Reply #4 on: March 29, 2006, 05:58:07 am »
This may be mis information but, I was told that the reason that VW is blowing the phat boxes out is that they have changed headunit manufacturers and the boxes are not compatible with the mk 5 cars - just puttin' it out there.
It was actually a small determinant in deciding not to buy the 2007 GTI and to stick with a new the Mk 4 .
Logged
What doesn't kill you makes you stronger? -  I'm dyin' over here!

Offline Phool

  • Newbie
  • Posts: 8
Re: kenwood -> vw
« Reply #5 on: April 20, 2006, 08:37:15 pm »
Hi -   I recall seeing posts on this list a long while ago re. the same thing - ie, VW changing HU manufacturer.   Paid no attention at the time since I didn't have a VW... am actually using a VW phatbox, but it's flashed with Kenwood firmware, in my Celica.   However - I have just bought a 2001 VW Passat 2.5 V6 Turbo Diesel....   Does anyone here know if I will have issues with the HU in that vehicle, and my 'Box...?   I was thinking of simply buying or making a VW cable and re-flashing the 'Box, but the previous post has now made me think... compatibility... ?   Thanks in advance - Phool.
Logged
Pages: [1]   Go Up
« previous next »