Author Topic: Ebay user upgrading DMS drives!?  (Read 12702 times)

0 Members and 1 Guest are viewing this topic.

Offline sulaco

  • A few posts under my belt.
  • *
  • Posts: 33

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: Ebay user upgrading DMS drives!?
« Reply #1 on: June 02, 2005, 01:34:05 pm »
hmmm.. interesting.  I guess that person is copying one fujitsu drive settings like Terry Kenedy was doing.. or its an expensive hoax

Offline ws

  • Newbie
  • Posts: 9
Re: Ebay user upgrading DMS drives!?
« Reply #2 on: June 03, 2005, 08:22:42 am »
Hoax or not, it's expensive. An 80Gb drive is around £75 in the UK so this joker wants £105 for doing the upgrade!

Offline judb

  • Administrator
  • Veteran.
  • *****
  • Posts: 1329
  • ph4t l3wtz
Re: Ebay user upgrading DMS drives!?
« Reply #3 on: June 03, 2005, 12:59:36 pm »
if this is someone in the phatnoise comunity thats found out how to do it and isnt sharing, thats gay, whats worse is they are trying to gain from the situation on their own and thats even more lame.

Offline para

  • Senior Member
  • Veteran.
  • *****
  • Posts: 181
Re: Ebay user upgrading DMS drives!?
« Reply #4 on: June 03, 2005, 02:51:29 pm »
Full ACK, that's the difference between hacking and cracking...

Offline bushing

  • Senior Member
  • Needs to get outside.
  • *****
  • Posts: 119
  • props to my peeps
Re: Ebay user upgrading DMS drives!?
« Reply #5 on: June 04, 2005, 02:13:05 am »
I doubt this is someone from the board.

This is probably just the drive cloning method -- taking a real 80 gig Phatnoise drive, buying a similar drive (note how it's specifically a Fujitsu drive ?) and using some tool to rewrite the serial number / drive ID info.

Some work with Google turns up a lot of crap, but it seems that in the end, that info is stored on a (less likely) EEPROM on the drive controller board or (more likely) on a reserved part of the drive, along with bad sector maps, etc.

The people who know about this stuff don't like to talk about it-- check this out for a great example: http://www.eio.com/public/harddrv/0779.html

It looks like a tool called PC 3000 could do it ... anyway ... back to other approaches.

Ben

Offline todd1010

  • Veteran.
  • ****
  • Posts: 346
  • 2005 Audi S4
Re: Ebay user upgrading DMS drives!?
« Reply #6 on: June 04, 2005, 02:28:31 am »
Its going to cost around 300 US dollars to get it done. So why woudn't you just spend the extra 50 bucks and get the real DMS. So I guess its really not worth it here in America.
todd1010 AT gmail DOT com

Offline cheese

  • Newbie
  • Posts: 6
Re: Ebay user upgrading DMS drives!?
« Reply #7 on: June 11, 2005, 07:19:09 am »
Each disk drive manufactuer has a tool to edit the serial number and other drive data stored on their platters below cylinder zero.  Beckytaylor obviously has Fujitsu's tool which allows her to clone their drives.

Offline bushing

  • Senior Member
  • Needs to get outside.
  • *****
  • Posts: 119
  • props to my peeps
Re: Ebay user upgrading DMS drives!?
« Reply #8 on: June 12, 2005, 11:08:59 am »
Quote
Each disk drive manufactuer has a tool to edit the serial number and other drive data stored on their platters below cylinder zero.  Beckytaylor obviously has Fujitsu's tool which allows her to clone their drives.


... That is a true statement.

-b

Offline daaron

  • Newbie
  • Posts: 1
  • less artsy, more fartsy
Re: Ebay user upgrading DMS drives!?
« Reply #9 on: June 16, 2005, 06:49:14 pm »
Surely it's not that hard to change a hard drive's serial number:

http://www.codeproject.com/system/change_drive_sn.asp

(Note: The eight digit number is the hex version of the purely numeric SN shown elsewhere.)

Anyone tried this?


Offline Terry_Kennedy

  • Senior Member
  • Veteran.
  • *****
  • Posts: 253
  • There and back again
Re: Ebay user upgrading DMS drives!?
« Reply #10 on: June 16, 2005, 08:35:42 pm »
Quote
Surely it's not that hard to change a hard drive's serial number:

http://www.codeproject.com/system/change_drive_sn.asp

(Note: The eight digit number is the hex version of the purely numeric SN shown elsewhere.)

Anyone tried this?

That is the Windows volume serial number. The PhatBox depends on the drive's manufacturing serial number, which is entirely different. Also, just changing the serial number will only let you use a model of drive PhatNoise already offers - my interest is in drives larger than the ones PhatNoise offers.