- Welcome to PhatHack.
Recent posts
#21
PhatBox Hacking / New Phatbox Owner Help!
Last post by Eric99 - October 28, 2021, 11:55:55 AMHello, I am the new owner of Phatbox. I got the phatbox from a friend and bought a dms drive, but I don't have any software for my Kenwood radio on it. What do I need and where to download them? I've read about Phatbox hacking but don't know how to do it. Please help 
#22
Phatnoise Media Manager / Re: INFO: Availablity of PMM a...
Last post by nackuk - December 26, 2020, 11:47:37 AMIn case anybody out there is wondering Phatnoise Music Manager and the DMS work really great with windows 10. Just plug in the usb and install the software and the DMS will be recognised without an issue. Its really great once more.
#23
PhatBox Hacking / Re: Problem creating new DMS w...
Last post by sticman - May 03, 2020, 06:57:07 AMA little bit late, from my experience ditch the windows 10. I have not (along with some others here) had any luck with Windows 10. I use VBox VM's of Windows 7 Home for the DMS tools and XP for the PMM 1.87 I have.
https://forum.phathack.com/index.php/topic,5392.0.html
Also talks about similar issue with Windows 10.
https://forum.phathack.com/index.php/topic,5392.0.html
Also talks about similar issue with Windows 10.
#24
Buying and Selling / FS: Kenwood Music Key KHD-C710...
Last post by eddy123 - November 02, 2019, 12:20:36 PMWell not sure if this is to any interest for anyone but have one for sale which I should have sell in 2016 when I removed it. I have the long Audi cable, 80Gb disk (DMS) and USB cradle. Further I can add all the related Phathack files if interest and AT&T Natural Voices. Its still cool to use anno 2019! :-) ps I'm in Europe!
#25
PhatBox Hacking / Problem creating new DMS with ...
Last post by stephengrenfell - November 01, 2019, 05:05:22 PMI am trying to create a new DMS using a 240GB mSATA SSD with IDE - mSATA converter.
All runs smoothly until the at the last moment when the progress bar finishes and the message Your New DMS is ready is displayed, then windows shows an exception - Data error (cyclic redundancy check). - see attached text file. Then the PhatHack DMS Tools just hangs... If I eject the DMS (in Windows), or choose to "quit" after Windows reports the exception error, and then remove the DMS. When the DMS is put back into the cradle - the DMS isn't recognised by DMS Tools it hangs, and so too Windows says there are two local drives but hangs if I try to access them.
I if take the SSD out of the DMS and connect it to my Mac I can see that the Phatsys and Phatdata are there along with what looks like all the files, but the Phatbox doesn't recognise the DMS.
I've tried several times (each time reformatting the SSD to FAT32 using my Mac before starting again) and always exactly the same result, also running Windows in Safe mode and it's still the same.
I am using Windows 10 (with all updates installed), and running PhatHack DMS Tools (Elevated Rights) as administrator.
If anyones still out there and has any ideas.....
All runs smoothly until the at the last moment when the progress bar finishes and the message Your New DMS is ready is displayed, then windows shows an exception - Data error (cyclic redundancy check). - see attached text file. Then the PhatHack DMS Tools just hangs... If I eject the DMS (in Windows), or choose to "quit" after Windows reports the exception error, and then remove the DMS. When the DMS is put back into the cradle - the DMS isn't recognised by DMS Tools it hangs, and so too Windows says there are two local drives but hangs if I try to access them.
I if take the SSD out of the DMS and connect it to my Mac I can see that the Phatsys and Phatdata are there along with what looks like all the files, but the Phatbox doesn't recognise the DMS.
I've tried several times (each time reformatting the SSD to FAT32 using my Mac before starting again) and always exactly the same result, also running Windows in Safe mode and it's still the same.
I am using Windows 10 (with all updates installed), and running PhatHack DMS Tools (Elevated Rights) as administrator.
If anyones still out there and has any ideas.....
#26
Phatnoise Media Manager / Re: INFO: Availablity of PMM a...
Last post by VorTechS - August 07, 2019, 10:25:59 AMHere's the non-activation version of PMM 3.92 (it asks for details after install on first startup, but doesn't try sending anything).
I just downloaded it and installed it on my machine:
PhatNoise Media Manager v3.92 Non-Activation
I just downloaded it and installed it on my machine:
PhatNoise Media Manager v3.92 Non-Activation
#27
Phatnoise Media Manager / Re: INFO: Availablity of PMM a...
Last post by VorTechS - August 07, 2019, 10:09:30 AMAh, not sure what's happened to phatnoise.us, but I'll get you a link. There's a lot of installers up for different version, I just can't remember what's what!
#28
Phatnoise Media Manager / Re: INFO: Availablity of PMM a...
Last post by nabeelr - August 07, 2019, 05:41:20 AMAny chance you could reupload the file?
When I download and run it, it says the archive is corrupted.
Thanks.
When I download and run it, it says the archive is corrupted.
Thanks.
#29
Phatnoise Media Manager / Re: Place to download PMM 3.92...
Last post by nabeelr - August 06, 2019, 01:18:44 AMSorry to revive a dead thread, but does anyone have updated links for the software listed above?
They all seem to be broken links now.
They all seem to be broken links now.
#30
Phatnoise Hardware Support / Re: Kenwood Stereo Compatibili...
Last post by VorTechS - July 11, 2019, 03:33:02 PMThanks for the information! I've updated the list!